FORD 2011 Ranger v.1 - Manual (Page 104)

Once the child safety seat has been installed using the safety belt, you
can attach the top tether strap.
Perform the following steps to install a child safety seat with tether
anchors:
1. Route the child safety seat tether strap over the back of the seat.
2. Locate the correct anchor for the selected seating position.
The tether anchor is located on the
rear lower portion of the passenger
seat.
Seating and Safety Restraints
104
2011 Ranger (ran)
Owners Guide, 1st Printing
USA (fus)