FORD 2011 Transit Connect v.1 - Manual (Page 21)

Information display type 2
1. Distance to empty / clock: Registers the approximate distance the
vehicle can travel before refueling is necessary. Clock shows the current
set time.
Switching the display between “clock” and “distance to empty”:
• Vehicles with “clock” displayed normally: Press the Select button (4)
to switch to the “distance to empty” display.
• Vehicles with “distance to empty” displayed normally: Press the Select
button (4) to switch to the “clock” display.
Setting the clock:
Vehicles with AM/FM radio: Press and hold the Select button (4)
until the time flashes in the display. Press the Select button (4) to set
the time.
Vehicles with AM/FM radio / CD player: Use the radio to set the
time. See Setting the clock in the Entertainment chapter.
2. Trip odometer: Registers the distance of individual journeys. Press
the Reset button (5) until the trip odometer resets.
3. Odometer: Registers the miles (kilometers) of the vehicle.
4. Select button: Press to switch between clock and distance to empty.
Also used to set the clock for vehicles equipped with AM/FM radio.
5. Reset button: Press until the trip odometer resets.
Note: The information display will remain on for several minutes after
you switch off the ignition.
If SHON or SHIP ON is displayed, the vehicle shipping mode is switched
on. Have your dealer switch off the vehicle shipping mode.
Instrument Cluster
21
2011 Transit Connect (tst)
Owners Guide, 1st Printing
USA (fus)