Crosley Radio CR79 - Manual (Page 10)

press”MODE” to Timer-on
setting
enter to
HOUR-ADJ mode
press”CLK-ADJ”
enter to
MINUTE-ADJ
mode press”FF/FB” to
target me and then
“CLK-ADJ”
enter to source
selection
end of Timer-on
adj press “CLK-ADJ”
press”PROG”
press”PROG”
press”PROG”
press”PROG”
press”FF OR FB”
press”PROG”
enter to
RE-PROGRAM
mode
enter to
PROGRAM mode
enter to
PROGRAM mode
CD stopped
All track repeat One track repeat (flashing)
Optional External Speakers
Random
9
Clock Operation
Timer-On Operation
Example: “Set Timer-On for 7:05 am.”
A Press “MODE” to timer-on display mode.
B Press “CLK-ADJ” to enter to timer-on hour
adjustment mode.
C Press “FF / FB” to set desired hour. (e.g.12:00am
7:00am )
D Press “CLK-ADJ” to enter to timer-on minute -
adjustment mode.
E Press “FF / FB” to set desired minute. (e.g.
7:00am 7:05am )
F Press “CLK-ADJ” to enter to recording source
mode.
G For Non-Timer-Recording, select ‘No-Src’. If
Timer-Recording require select a particular
source (CD/TUNER/PHONO).
H Press “CLK-ADJ” to return to timer-on display
mode with activation of Timer-on function.
A Press “TIMER” to deactivate (both icons
flash) or activate (only ‘Timer’ flash ) Timer-
on function.
press”FF/FB”
to select
source
(CD/TUNER/
PHONO)
for syno-
Rec only
Timer-on function activated
deactivate
Timer-on function press”TIMER”
CD Player & Connecting Optional Equipment
A In the stop or play mode, Press “RANDOM” to
activate or deactivate the random function.
Notes:
1) It can work with “INTRO”, “REPEAT” and
“REMAIN”.
2) The random function will not clear except press
“STOP” twice or press “PROG” in STOP mode.
14
press “RANDOM”
play with Random
press “RANDOM”
play without
Random
Repeat
To repeat playback of a single track or the whole
disk, press the “REPEAT” button. Pressing this
button once will repeat only the selected track and
a flashing "REPEAT" will appear on the display.
Pressing the “REPEAT” button twice will repeat the
whole CD when it reaches the end and repeat will
appear but will not flash. Pressing “REPEAT” a third
time will turn off the repeat function.
1 With your new radio, you have the option of
adding external speakers.
2 The speaker jacks for external speakers are
located on the back of the radio. Along with the
speaker jacks is a switch labeled int./ ext. When
using external speakers, this switch must be
switched to the ext. position. Doing this turns off
the internal speakers in the radio and redirects
the power to the external speakers.
3 If you decide not to use the external speakers,
be sure the switch is on int. or the internal
speakers will not work.