Crown victoria severe duty – FORD 2010 Crown Victoria v.1 User Manual
Page 288
represent “free form” deployments without the loading of occupants. The
shaded areas in Figures 6 through 8 represent available police equipment
mounting zones. These zones are shown for police vehicles equipped
with standard bucket seats. While bench seats are optional and still
appropriate for vehicles with certain limited police equipment
requirements, the standard bucket seats are recommended for vehicles
that require maximum available space for police equipment mounting.
The zone dimensions provided in Figures 6 through 8 are approximate
and will vary with the loading of occupants in the seats.
All airbag and equipment mounting zone dimensions are approximate
due to different airbag deployment characteristics.
No equipment will mount between the side of the front seat and the
door trim to block deployment of the side airbag.
Figure 1
1. 9.5 inches (240 mm) from center of airbag door
2. 15.7 inches (400 mm) from center of airbag door
3. 28.5 inches (725 mm)
No objects should be placed between the airbags due to airbag
variability.
10
20
30
40
50
60 70
80
90
100
110
120
20
40
60
80
100
120
140
160
180
200
L
P R N D 2 1
1
2
3
Crown Victoria Severe Duty
288
2010 Crown Victoria (cro)
Owners Guide, 1st Printing
USA (fus)