FORD 2010 Edge v.1 - Manual (Page 262)

Removing the jumper cables
Remove the jumper cables in the reverse order that they were
connected.
1. Remove the jumper cable from the ground metal surface.
Note: In the illustrations, lightning bolts are used to designate the
assisting (boosting) battery.
2. Remove the jumper cable on the negative (-) connection of the
booster vehicle’s battery.
+ –
+ –
+ –
+ –
Roadside Emergencies
262
2010 Edge (edg)
Owners Guide (own2002), 1st Printing
USA (fus)