Tire change procedure, Roadside emergencies – FORD 2010 Escape v.2 User Manual

Page 259

Advertising
background image

5. Use the lug wrench to remove the
lug nut from the spare tire tether.

6. If not replacing the spare or flat
tire to the underbody storage area,
raise winch up into the installed
position.

7. Use the attached fastener strap
(2) to tie the tether end to the
winch actuator shaft (if equipped).

Tire change procedure

WARNING: When one of the front wheels is off the ground, the
transmission alone will not prevent the vehicle from moving or

slipping off the jack, even if the vehicle is in P (Park) (automatic
transmission) or R (Reverse) (manual transmission).

WARNING: To help prevent the vehicle from moving when you
change a tire, be sure the parking brake is set, then block (in

both directions) the wheel that is diagonally opposite (other side and
end of the vehicle) to the tire being changed.

WARNING: If the vehicle slips off the jack, you or someone else
could be seriously injured.

Roadside Emergencies

259

2010 Escape (204)
Owners Guide, 2nd Printing
USA
(fus)

Advertising
This manual is related to the following products: