One-touch up or down (driver’s window only), Driver controls – FORD 2010 Flex v.2 User Manual

Page 99

Advertising
background image

Press and pull the window switches
to open and close windows.
• Press down (to the first detent)

and hold the switch to open.

• Pull up (to the first detent) and

hold the switch to close.

Rear window buffeting: When one or both of the rear windows are
open, the vehicle may demonstrate a wind throb or buffeting noise. This
noise can be alleviated by lowering a front window approximately two to
three inches.

One-touch up or down (driver’s window only)

This feature allows the driver’s window to open or close fully without
holding the control down.

To operate one-touch down:
• Press the switch completely down

to the second detent and release
quickly. The window will open
fully. Momentarily press the
switch to any position to stop the
window operation.

If the switch is pressed and held to
the normal close or one-touch up position during a one-touch down
event, the window will stop. If, after 1/2 second the switch is still held,
the window will perform a normal close or one-touch up.

To operate one-touch up:
• Pull the switch completely up to

the second detent and release
quickly. The window will close
fully. Momentarily press the
switch to any position to stop the
window operation.

If the switch is pressed and held to
the normal open or one-touch down position during a one-touch up
event, the window will stop. If, after 1/2 second the switch is still held,
the window will perform a normal open or one-touch down.

AUTO

Driver Controls

99

2010 Flex (471)
Owners Guide, 2nd Printing
USA
(fus)

Advertising
This manual is related to the following products: