Driving, Starting, Positions of the ignition – FORD 2009 Crown Victoria v.2 User Manual

Page 168: Preparing to start your vehicle

Advertising
background image

STARTING

Positions of the ignition

1. Off— shuts off the engine and all
accessories/locks the gearshift lever
and allows key removal.

2. Accessory— allows the electrical
accessories such as the radio to
operate while the engine is not
running.

3. On— all electrical circuits
operational. Warning lights
illuminated. Key position when
driving.
4. Start— cranks the engine. Release the key as soon as the engine
starts.

Preparing to start your vehicle
Engine starting is controlled by the powertrain control system.
This system meets all Canadian interference-causing equipment standard
requirements regulating the impulse electrical field strength of radio
noise.
When starting a fuel-injected engine, avoid pressing the accelerator
before or during starting. Only use the accelerator when you have
difficulty starting the engine. For more information on starting the
vehicle, refer to Starting the engine in this chapter.

WARNING: Extended idling at high engine speeds can produce
very high temperatures in the engine and exhaust system,

creating the risk of fire or other damage.

WARNING: Do not park, idle, or drive your vehicle in dry grass
or other dry ground cover. The emission system heats up the

engine compartment and exhaust system, which can start a fire.

WARNING: Do not start your vehicle in a closed garage or in
other enclosed areas. Exhaust fumes can be toxic. Always open

the garage door before you start the engine. See Guarding against
exhaust fumes
in this chapter for more instructions.

2009 Crown Victoria (cro)
Owners Guide, 2nd Printing
USA
(fus)

Driving

168

Advertising