Seating and safety restraints – FORD 2009 Taurus X v.2 User Manual

Page 211

Advertising
background image

Delivery van

Attach the tether strap only to the appropriate tether anchor as shown.
The tether strap may not work properly if attached somewhere other
than the correct tether anchor.

Once the child safety seat has been installed, using either the safety belt,
the lower anchors of the LATCH system, or both, you can attach the top
tether strap.

Perform the following steps to attach a child safety seat to the tether
anchor:

1. Route the child safety seat tether
strap over the back of the seat.

For vehicles with adjustable head
restraints, route the tether strap
under the head restraint and
between the head restraint posts,
otherwise route the tether strap
over the top of the seatback. If the
top of the safety seat hits the head
restraint, raise the head restraint to
let the child seat fit further
rearward.

2. Locate the correct anchor for the selected rear seating position.

2009 Taurus X (219)
Owners Guide, 2nd Printing
USA
(fus)

Seating and Safety Restraints

211

Advertising