Driving – FORD 2008 E-450 v.1 User Manual

Page 176

Advertising
background image

Always set the parking brake fully and make sure the gearshift is
latched in P (Park). Turn the ignition to the LOCK position and

remove the key whenever you leave your vehicle.

R (Reverse)

With the gearshift lever in R (Reverse), the vehicle will move backward.
Always come to a complete stop before shifting into and out of R
(Reverse).

N (Neutral)

With the gearshift lever in N (Neutral), the vehicle can be started and is
free to roll. Hold the brake pedal down while in this position.

(Overdrive)

The normal driving position for the
best fuel economy. Transmission
operates in gears one through four.

Overdrive can be deactivated by
pressing the transmission control
switch on the end of the gearshift
lever.

The O/D OFF lamp will illuminate in
the instrument cluster.

Drive (not shown)

Drive is activated when the transmission control switch is pressed.
• This position allows for all forward gears except overdrive.
• O/D OFF lamp is illuminated.
• Provides engine braking.
• Use when driving conditions cause excessive shifting from O/D to

other gears. Examples: city traffic, hilly terrain, heavy loads, trailer
towing and when engine braking is required.

• To return to O/D (Overdrive), press the transmission control switch.

The O/D OFF lamp will not be illuminated.

• O/D (Overdrive) is automatically returned each time the key is turned

off.

O/D

ON/OFF

O/D

OFF

2008 Econoline (eco)
Owners Guide (post-2002-fmt)
USA
(fus)

Driving

176

Advertising
This manual is related to the following products: