Exterior mirrors, Power side view mirrors, Powerfold mirrors (if equipped) – FORD 2007 Expedition v.2 User Manual

Page 102: Mirrors, Driver controls

Advertising
background image

Do not block the sensors on the front and back of the interior
rear view mirror since this may impair proper mirror
performance.

Do not clean the housing or glass of any mirror with harsh
abrasives, fuel or other petroleum-based cleaning products.

EXTERIOR MIRRORS

Power side view mirrors

The ignition can be in any position to adjust the power side view mirrors.

To adjust your mirrors:

1. Rotate the control clockwise to
adjust the right mirror and rotate
the control counterclockwise to
adjust the left mirror.

2. Move the control in the direction
you wish to tilt the mirror.

3. Return to the center position to
lock mirrors in place.

Powerfold mirrors (if equipped)

Rotate the 4–way adjustment switch
to the center position. Press the
switch down to auto fold in and
down again to auto fold back to
design position. Powerfold the side
mirrors in carefully when driving
through a narrow space, like an
automatic car wash.

The mirrors may be moved
inward/outward manually, however,
if a mirror is moved manually, it will
need to be reset. To reset: with the switch in the center position, press
the switch down to fold the mirrors in and wait a short period (8
seconds). An audible

ЉclickЉ will be heard indicating re-synchronization.

If the click is not heard, use the switch to fold the mirrors out, then in,
until the click is heard. After that, the mirrors will operate to their
normal positions until they are again moved manually.

POWER FOLD

2007 Expedition (exd)
Owners Guide (post-2002-fmt)
USA
(fus)

Driver Controls

102

Advertising