Panel dimmer control, Aiming the headlamps, Headlamp aim adjustment – FORD 2007 Explorer Sport Trac v.1 User Manual

Page 44: Lights

Advertising
background image

PANEL DIMMER CONTROL

Use to adjust the brightness of the
instrument panel when exterior
lights are on.
• Rotate the thumbwheel from left

to right to brighten the
instrument panel.

• Rotate the thumbwheel from right

to left to dim the instrument
panel.

• Rotate to fully to the right (past detent) to turn on interior lamps.

• Rotate to the left position (past detent) to turn off the interior lamps

and will also disable the illuminated entry feature.

AIMING THE HEADLAMPS
The headlamps on your vehicle are properly aimed before leaving the
assembly plant. If your vehicle is involved in an accident or if you have
problems fixing the alignment of your headlamps, have them checked by
a qualified service technician.

Headlamp aim adjustment
The headlamps on your vehicle can only be vertically adjusted. Your
vehicle does not require horizontal aim adjustments.
To adjust the headlamps:
1. Park your vehicle on a level surface about 25 feet (7.6 meters) away
from a vertical plain surface (3). Check your headlamp alignment at
night or in a dark area so that you can see the headlamp beam pattern.
• (1) Eight feet
• (2) Center height of lamp to

ground

• (3) Twenty-five feet
• (4) Horizontal reference line
2. The center of the headlamp has a
3.0 mm circle on the lens. Measure
the height from the center of your
headlamp to the ground (2) and
mark an 8 foot (2.4 meter) long
horizontal line on the plain surface (1) at this height (masking tape
works well).

2007 07+ Explorer Sport Trac (esp)
Owners Guide (post-2002-fmt)
USA
(fus)

Lights

44

Advertising