Engine coolant, Checking engine coolant, Maintenance and specifications – FORD 2007 F-550 v.1 User Manual

Page 264

Advertising
background image

• Always dispose of automotive

batteries in a responsible manner.
Follow your local authorized
standards for disposal. Call your
local authorized recycling center
to find out more about recycling
automotive batteries.

ENGINE COOLANT

Checking engine coolant

The concentration and level of engine coolant should be checked at the
mileage (kilometer) intervals listed in the scheduled maintenance
information
. The coolant concentration should be maintained at 50/50
coolant and distilled water, which equates to a freeze point of -34°F
(-36°C). Coolant concentration testing is possible with a hydrometer or
antifreeze tester (such as the Rotunda Battery and Antifreeze Tester,
014–R1060). The level of coolant should be maintained at the “FULL
COLD” level or within the “COLD FILL RANGE” in the coolant reservoir.
If the level falls below, add coolant per the instructions in the Adding
engine coolant
section.

Your vehicle was factory-filled with a 50/50 engine coolant and water
concentration. If the concentration of coolant falls below 40% or above
60%, the engine parts could become damaged or not work properly. A
50/50 mixture of coolant and water provides the following:
Freeze protection down to -34°F (-36°C).
Boiling protection up to 265°F (129°C).
Protection against rust and other forms of corrosion.
Enables calibrated gauges to work properly.

L

E

A

D

RETURN

RECYCLE

2007 F-250/350/450/550 (f23)
Owners Guide (post-2002-fmt)
USA
(fus)

Maintenance and Specifications

264

Advertising
This manual is related to the following products: