Replacing headlamp bulbs, Replacing front parking lamp/turn signal bulbs, Lights – FORD 2007 Focus v.3 User Manual

Page 40

Advertising
background image

Replacing headlamp bulbs

1. Make sure the headlamp control
is in the OFF position and open the
hood.

2. Pull off the bulb cap.

3. Disconnect electrical connector
from the bulb.

4. Twist off the bulb retainer ring by
turning it counterclockwise.

5. Pull the bulb straight out.

Install in reverse order.

Handle a halogen headlamp bulb carefully and keep out of
children’s reach. Grasp the bulb by only its plastic base and do

not touch the glass. The oil from your hand could cause the bulb to
break the next time the headlamps are operated.

Note: If the bulb is accidentally touched, it should be cleaned with
rubbing alcohol before being used.

Replacing front parking lamp/turn signal bulbs

1. Make sure the headlamp control
is in the OFF position and open the
hood.

2. Remove the bulb socket from the
lamp assembly by turning
counterclockwise.

3. Pull the bulb straight out of the
socket.

Install in reverse order.

2007 Focus (foc)
Owners Guide (post-2002-fmt)
USA
(fus)

Lights

40

Advertising