Driver controls, Multi-function lever, Windshield wiper/washer features – FORD 2005 Crown Victoria v.3 User Manual

Page 53: Changing the wiper blades, Windshield wiper/washer control

Advertising
background image

MULTI-FUNCTION LEVER

Windshield wiper: Rotate the end
of the control away from you to
increase the speed of the wipers;
rotate towards you to decrease the
speed of the wipers.

Windshield washer: Push the end
of the stalk:
• briefly: causes a single swipe of

the wipers without washer fluid.

• a quick push and hold: the wipers

will swipe three times with
washer fluid.

• a long push and hold: the wipers and washer fluid will be activated for

up to ten seconds.

Windshield wiper/washer features

The exterior lamps will turn on with the ignition on, Headlamp control in
the Autolamp position and the windshield wipers are turned on.

Changing the wiper blades

1. Pull the wiper arm away from the
glass one to two inches and proceed
to step 2.

2. Pull the retainer clip of the blade
up and slide the blade off the wiper
arm pin.

3. To attach the new wiper blade,
pull the retainer clip of the blade up
and slide the blade into the wiper
arm pin, then push down the
retainer clip to lock position..

4. Clean blades and glass as recommended in Cleaning chapter and
replace wiper blades at least once per year or before winter for optimum
performance

2005 Crown Victoria (cro)
Owners Guide (post-2002-fmt)
USA
(fus)

Driver Controls

53

Advertising