Seating and safety restraints – FORD 2005 Escape v.5 User Manual

Page 141

Advertising
background image

3. Locate the correct anchor for the
selected seating position.

There are three tether anchors
located on the headliner at the rear
of the vehicle.

4. Clip the tether strap to the
anchor as shown.

The arrow in the above graphic
points toward the front of the
vehicle.

If the tether strap is clipped
incorrectly, the child safety

seat may not be retained properly
in the event of a collision.

5. Install the child safety seat tightly
using the LATCH anchors or safety
belts. Follow the instructions in this chapter.

6. Tighten the child safety seat tether strap according to the
manufacturer’s instructions.

If the safety seat is not anchored properly, the risk of a child
being injured in a collision greatly increases.

2005 Escape (204)
Owners Guide (post-2002-fmt)
USA
(fus)

Seating and Safety Restraints

141

Advertising