Steering, Speed sensitive steering, Automatic transmission operation – FORD 2005 Thunderbird v.2 User Manual

Page 144: Brake-shift interlock, Transmission operation, Driving

Advertising
background image

STEERING

To prevent damage to the power steering system:
• Never hold the steering wheel at its furthest turning points (until it

stops) for more than a few seconds when the engine is running.

• Do not operate the vehicle with a low power steering pump reservoir

fluid level (below the MIN mark on the reservoir).

If the power steering system breaks down (or if the engine is turned
off), you can steer the vehicle manually, but it takes more effort.

If the steering wanders or pulls, check for:
• an improperly inflated tire
• uneven tire wear
• loose or worn suspension components
• loose or worn steering components
• improper steering alignment
A high crown in the road or high crosswinds may also make the steering
seem to wander/pull.

Speed sensitive steering

The steering in your vehicle is speed sensitive. At high speeds, steering
assist will decrease to improve steering feel. At lower speeds,
maneuverability will be increased.

If the amount of effort required to steer your vehicle changes while
driving at a constant vehicle speed, have the power steering system
checked by your dealer or a qualified service technician.

AUTOMATIC TRANSMISSION OPERATION

Brake-shift interlock

This vehicle is equipped with a brake-shift interlock feature that prevents
the gearshift lever from being moved from P (Park) when the ignition is
in the RUN position unless brake pedal is depressed.

If you cannot move the gearshift lever out of P (Park) with ignition in
the RUN position and the brake pedal depressed:

1. Apply the parking brake, turn ignition key to LOCK, then remove the
key.

2. Insert the key and turn it to OFF. Apply the brake pedal and shift
to N (Neutral).

2005 Thunderbird (tbr)
Owners Guide (post-2002-fmt)
USA
(fus)

Driving

144

Advertising