Driver controls – FORD 2004 Crown Victoria v.2 User Manual

Page 49

Advertising
background image

OVERHEAD CONSOLE WITHOUT MOON ROOF (IF EQUIPPED)

The appearance of your vehicle’s overhead console will vary according to
your option package. Some of the features in the overhead console
include a compass and HomeLink

௡. To program the Homelink௡, refer to

Homelink

Wireless Control System it this chapter.

Electronic compass display (if equipped)

Compass: The compass display is contained in the overhead console.
The vehicle heading is displayed as one of N, NE, E, SE, S, SW, W and
NW.

The compass reading may be affected when you drive near large
buildings, bridges, power lines and powerful broadcast antenna. Magnetic
or metallic objects placed in or on the vehicle may also affect compass
accuracy. Adjustments may need to be made to the zone and calibration
of the compass.

Compass zone adjustment

1. Determine which magnetic zone
you are in by referring to the zone
map.

2. Turn the ignition to the ON
position.

3. Press and hold the MODE control
until VAR appears in the display,
then release. The display should
show the current zone number.

4. Press the MODE control until the
desired zone number appears. The
display will flash and then return to
normal operation. The zone is now
updated.

1

2

3

4

5

6

7 8 9 1011

12

13

14

15

2004 Crown Victoria (cro)
Owners Guide (post-2002-fmt)
USA English
(fus)

Driver Controls

49

Advertising