Locks and security – FORD 2004 Freestar v.2 User Manual

Page 103

Advertising
background image

The correct coded key must be used for your vehicle. The use of the
wrong coded key may lead to a “no start” condition.

If an unprogrammed key is used in the ignition, it will cause a
“no start” condition.

Programming spare keys

A maximum of eight keys can be coded to your vehicle. Only
SecuriLock

௢ keys can be used. To program a coded key yourself, you

will need two previously programmed coded keys (keys that already
operate your vehicle’s engine) and the new unprogrammed key(s) readily
accessible for timely implementation of each step in the procedure.

If two previously programmed coded keys are not available, you must
bring your vehicle to your dealership to have the spare coded key(s)
programmed.

Please read and understand the entire procedure before you begin.

1. Insert the first previously
programmed coded key into the
ignition and turn the ignition from
the 3 (OFF) position to the 4 (ON)
position [maintain ignition in 4 (ON)
for at least three seconds, but no
more than ten seconds].

2. Turn ignition from the 4 (ON)
position back to the 3 (OFF)
position in order to remove the first
coded key from the ignition.

3. Within ten seconds of removing the first coded key, insert the second
previously programmed coded key into the ignition and turn the ignition
from the 3 (OFF) position to the 4 (ON) position [maintain ignition in
the 4 (ON) position for at least three seconds but no more than ten
seconds].

4. Turn the ignition from the 4 (ON) position back to the 3 (OFF)
position in order to remove the second coded key from the ignition.

5. Within 10 seconds of removing the second coded key, insert the new
unprogrammed key (new key/valet key) into the ignition and turn the
ignition from the 3 (OFF) position to the 4 (ON) position [maintain
ignition in the 4 (ON) position for at least three seconds, but no more
than ten seconds]. This step will program your new key to a coded key.

6. To program additional new unprogrammed key(s), repeat this
procedure from step 1.

3

1

2

5

4

Locks and Security

102

Advertising