Locks and security – FORD 2003 Expedition v.2 User Manual

Page 152

Advertising
background image

• When the ignition is in the ON position, the indicator will glow for 3

seconds to indicate normal system functionality.

If a problem occurs with the SecuriLock

௢ system, the indicator will flash

rapidly or glow steadily when the ignition is in the ON position. If this
occurs, the vehicle should be taken to an authorized dealer for service.

Automatic arming

The vehicle is armed immediately
after switching the ignition to the 1
(OFF) position.

Automatic disarming

Switching the ignition to the 3 (ON) position with a coded key disarms
the vehicle.

Key information

Your vehicle is supplied with two coded keys. Only a coded key will
start your vehicle. Spare coded keys can be purchased from your
dealership. Your dealership can program your key or you can “do it
yourself.” Refer to Programming spare keys.

The following items may prevent the vehicle from starting:
• Large metallic objects
• Electronic devices on the key chain that can be used to purchase

gasoline or similar items

• A second key on the same key ring as the coded key
If any of these items are present, you need to keep these objects from
touching the coded key while starting the engine. These objects and
devices cannot damage the coded key, but can cause a momentary “no
start” condition if they are too close to the key during engine start. If a
problem occurs, turn ignition OFF and restart the engine with all other
objects on the key ring held away from the ignition key. Check to make
sure the coded key is an approved Ford coded key.

4

3

2

1

Locks and Security

152

Advertising