P! brake, Driving – FORD 2003 Taurus v.2 User Manual

Page 115

Advertising
background image

full steering control during hard braking and on slippery surfaces.
However, the ABS does not decrease stopping distance.

ABS warning lamp

ABS

The

ABS

lamp in the instrument cluster momentarily illuminates when

the ignition is turned to ON. If the light does not illuminate during start
up, remains on or flashes, the ABS may be disabled and may need to be
serviced.

Even when the ABS is disabled,
normal braking is still effective. (If
your BRAKE warning lamp
illuminates with the parking brake
released, have your brake system
serviced immediately.)

Parking brake

To set the parking brake (1), press
the parking brake pedal down until
the pedal stops. The BRAKE
warning lamp will illuminate and will
remain illuminated until the parking
brake is released.

To release, pull the lever (2).

Always set the parking
brake fully and make sure

that the gearshift is securely
latched in P (Park).

Park brake warning chime
Sounds when the parking brake is set, the engine is running and the
transaxle is not in P (Park) or N (Neutral). The chime will shut off when
the parking brake is disengaged.

TRACTION CONTROL

ி (IF EQUIPPED)

Your vehicle may be equipped with a Traction Control

௢ system. This

system helps you maintain the stability and steerability of your vehicle,
especially on slippery road surfaces such as snow- or ice-covered roads
and gravel roads. The system will allow your vehicle to make better use
of available traction in these conditions.

P

!

BRAKE

2

1

P

!

BRAKE

Driving

115

Advertising