Homelink, Universal transceiver (type b), If so equipped) -54 – NISSAN 2013 370Z Roadster - Owner's Manual User Manual

Page 118: Programming homelink, Warning

Advertising
background image

Black plate (116,1)

[ Edit: 2012/ 4/ 11 Model: Z34-D ]

2-54

Instruments and controls

JVI0441X

The Type B system can be identified by the IV

*

1

on the back of the mirror. Move the mirror to

see if the IV is present. If the IV is on the mirror,
use the procedure in this section to program the
HomeLink

®

Universal Transceiver. Otherwise,

use the procedure in "HOMELINK

®

UNIVERSAL

TRANSCEIVER (Type A) (if so equipped).

The HomeLink

®

Universal Transceiver provides a

convenient way to consolidate the functions of
up to three individual hand-held transmitters into
one built-in device.

HomeLink

®

Universal Transceiver:

.

Will operate most Radio Frequency (RF)
devices such as garage doors, gates, home
and office lighting, entry door locks and

security systems.

.

Is powered by your vehicle’s battery. No
separate batteries are required. If the
vehicle’s battery is discharged or is dis-
connected, HomeLink

®

will retain all pro-

gramming.

When the HomeLink

®

Universal Transcei-

ver is programmed, retain the original
transmitter for future programming proce-
dures (Example: new vehicle purchases).
Upon sale of the vehicle, the programmed
HomeLink

®

Universal Transceiver buttons

should be erased for security purposes.
For additional information, refer to “Pro-
gramming HomeLink

®

” (P.2-54).

WARNING

.

Do not use the HomeLink

®

Universal

Transceiver with any garage door
opener that lacks safety stop and
reverse features as required by
federal safety standards. (These
standards became effective for
opener models manufactured after
April 1, 1982). A garage door opener
which cannot detect an object in the
path of a closing garage door and
then automatically stop and reverse,

does not meet current federal safety
standards. Using a garage door
opener without these features in-
creases the risk of serious injury or
death.

.

During the programming procedure
your garage door or security gate
will open and close (if the transmit-
ter is within range). Make sure that
people or objects are clear of the
garage door, gate, etc. that you are
programming.

.

Your vehicle’s engine should be
turned off while programming the
HomeLink

®

Universal Transceiver.

Do not breathe exhaust gases; they
contain colorless and odorless car-
bon monoxide. Carbon monoxide is
dangerous. It can cause uncon-
sciousness or death.

PROGRAMMING HomeLink

®

If you have any questions or are having difficulty
programming your HomeLink

®

buttons, refer to

the HomeLink

®

web site at: www.homelink.com

or call 1-800-355-3515.

HomeLink

®

UNIVERSAL

TRANSCEIVER (Type B) (if so
equipped)

Advertising
This manual is related to the following products: