NISSAN 2014 Quest - Navigation System Owner's Manual - Manual (Page 31)

STARTING ROUTE GUIDANCE
After setting the destination and performing
route calculation, the suggested route is dis-
played.
1. Highlight [Start] and push <ENTER>.
2. Once route guidance is started, the system
navigates through the guide points using
visual and voice guidance.
3. When approaching a guide point, the
system automatically changes to the split
screen and shows an enlarged view of the
intersection in the left screen.
Push <MAP> to switch to the full map
screen.
4. When arriving at the destination, route
guidance automatically ends.
CANCELING ROUTE
Delete a route that is already set according to
the following procedure.
1. Push <ROUTE>.
2. Highlight [Cancel Route] and push
<ENTER>.
3. A confirmation message is displayed. High-
light [Yes] and push <ENTER>.
Getting started 2-21