NISSAN 2013 Altima Sedan - Quick Reference Guide - Manual (Page 13)

HEADLIGHT CONTROL SWITCH
HEADLIGHT cONTROL
Turn the headlight control switch to the
position
01
to turn on the front parking, tail, license plate and
instrument panel lights. Turn the switch to the
position
02
to turn on the headlights.
AUTOLIGHT SYSTEM (if so equipped)
The autolight system will automatically turn the headlights on when it is dark and off when it is
light. The system will keep the headlights on for a period of time after you turn the ignition off
and all doors are closed.
To activate the autolight system, turn the headlight control switch to the AUTO position
03
then push the ignition switch to ON. To deactivate the autolight system, turn the headlight
control switch to the OFF, 01
or position
02
.
HIGH BEAM SELEcT
Push the headlight control switch forward
04
to
select the high beam function. The blue indicator
light illuminates in the instrument panel. Pull the
headlight control switch back to the original position
to select the low beam. The blue indicator light
goes off.
Pull and release the headlight control switch
05
to flash the headlight high beams on and off.
FOG LIGHT SWITcH (if so equipped)
NOTE: The headlights must be on and the low beams
selected for the fog lights to operate.
Turn the switch (inside collar) to the position
06
to turn the fog lights on.
Turn the switch (inside collar) to the OFF position to
turn the fog lights off.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
01
03
02
04
05
06
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi
11
1482394_13d_AltimaSedan_QRG_030613.indd 11 3/6/13 1:17 PM