Outside mirror control switch, Passenger rear seat entry/exit, Starting/stopping the engine – NISSAN 2013 Altima Coupe - Quick Reference Guide User Manual

Page 7

Advertising
background image

OUTSIDE MIRROR CONTROL SWITCh

To select the right or left side mirror, turn the control
switch

01

right or left.

To adjust the mirror angle, move the control switch
up, down, right or left.

To prevent accidentally moving the mirror, turn and
set the switch to the middle “neutral” position.

for more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.

PASSENGER REAR SEAT ENTRY/EXIT

enTRY fROM OuTSide THe VeHicLe

Pull the seat recliner lever

01

to the uppermost

position pushing the seatback forward. Slide the
entire seat forward to access the rear seat.

eXiTinG fROM inSide THe VeHicLe

Pull the upper seatback release lever

02

to the

uppermost position, pushing the seatback forward.
Slide the entire seat forward to exit from the rear seat.

for more information, refer to the “Safety –– Seats, seat belts and
supplemental restraint system (section 1)”
of your Owner’s Manual.

01

02

5

01

To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi

STARTING/STOPPING ThE ENGINE

nOTe: it is important to make sure the niSSAn intelligent
key

®

is with you (that is, in your pocket or purse).

Depress the brake pedal.
• If the brake pedal is not depressed, pushing the
ignition switch once enters the ACC mode.
• If the ignition is pushed a second time, the vehicle
will enter the ON mode.

Move the shift lever to P (PARk).

Push the ignition switch to start the engine.

TuRninG THe enGine Off

Move the shift lever to the P (PARk) position and apply the parking brake.

Press the ignition switch START/STOP button to turn the engine off

for more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.

Advertising