NISSAN 2009 Altima Hybrid - Quick Reference Guide - Manual (Page 23)

SYSTEM OPERATING TIPS
Ⅲ Close all windows. Surrounding noises may interfere with system operation and
performance.
Ⅲ Press the
button on the steering wheel to activate voice recognition.
Ⅲ Wait for the “Please say a command” prompt and the listening tone before speaking.
Ⅲ Begin speaking a command within 1.5 seconds of the listening tone.
Ⅲ To cancel a voice recognition session, press and hold the
button or press the
button.
Ⅲ To increase or decrease the volume of the voice prompts, push the + or – (volume)
control buttons on the steering wheel or turn the VOL (volume) knob on the audio
system while the system is responding.
Ⅲ Speak in a clear and natural voice without pausing between words.
Ⅲ Some commands are not available while the vehicle is in motion.
Ⅲ The “Help” command will bring up the voice recognition command list.
Ⅲ Please refer to the cellular phone manufacturer Owner’s Manual for detailed information
regarding your Bluetooth
ா phone.
Ⅲ For recommended phones and detailed instructions, please visit
www.nissanusa.com/bluetooth .
PAIRING YOUR PHONE
Before using the hands-free feature, you need to set-up, or pair, the system to recognize your
compatible cellular phone(s). Five Bluetooth
ா-enabled phones can be paired. After set-up,
the system automatically connects with a paired phone when the ignition is in the ACC or ON
position, as long as the phone is on and in the vehicle.
PAIRING PROCEDURE
NOTE: The vehicle must be stationary when pairing
the phone.
INITIAL PAIRING
NOTE: This procedure can only be used to pair the
first phone to the system.
1. Press the button on the steering wheel.
2. A message is displayed. Press the button again.
3. The system will direct you to SETUP –> Phone –> Bluetooth Setup –> Pair Phone
menu.
4. Touch one of the “None (Add New)” keys.
21