Nissan voice recognition -23 – NISSAN 2012 Pathfinder - Navigation System Owner's Manual User Manual

Page 31

Advertising
background image

INFO:

. You can push <BACK> on the control

panel to return to the previous screen, but
only after deleting all the numbers entered.

. When you touch [BACK] on the screen, the

screen returns to the previous screen even
when numbers have been entered.

NISSAN VOICE RECOGNITION

NISSAN Voice Recognition allows hands-free
operation of the navigation system and other
systems equipped on this vehicle, in one of two
modes, Standard Mode or Alternate Command
Mode. In Standard Mode, you can operate
Phone and Information.

The commands that are available are always
shown on the display and announced by the
system. You can complete your desired opera-
tion by simply following the prompts given by the
system. In Standard Mode, hands–free opera-
tion of Audio, Climate Control and Display is not
available through Voice Recognition.

For U.S. customers, Standard Mode is selected
by default. For Canadian customers, Alternate
Command Mode is the default mode.

INFO:

. For the voice commands for the audio, air

conditioner and other systems, refer to the
Owner’s Manual of your vehicle. The follow-
ing sections refer only to the navigation,
phone, and information systems.

. When the system language is set to

“Franc¸ais” (French) the available commands
and functions differ from those available
when using the system in English.

Using the system

Initialization:

When the ignition switch is pushed to the ON
position, NISSAN Voice Recognition is initia-
lized, which may take up to one minute. When
completed, the system is ready to accept voice
commands. If <TALK> is pushed before the
initialization completes, the display will show the
message: “Phonetic data downloading. Please
wait.”

Before starting

To get the best recognition performance from
NISSAN Voice Recognition, observe the follow-
ing:

. The interior of the vehicle should be as quiet

as possible. Close the windows to eliminate
the surrounding noises (traffic noise and
vibration sounds, etc.), which may prevent
the system from correctly recognizing the
voice commands.

. Wait until the tone sounds before speaking a

command.

. Speak in a natural conversational voice

without pausing between words.

. If the air conditioner is set to “Auto”, the fan

speed is automatically lowered so that your
commands can be recognized more easily.

NISSAN VOICE RECOGNITION

Getting started

2-23

Advertising
This manual is related to the following products: