NISSAN 2013 Armada - Quick Reference Guide User Manual

Page 17

Advertising
background image

13

To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi

Speak in a clear and natural voice without pausing between words.
Look straight ahead and avoid speaking too loudly or too softly.
To go back to the previous command, say “Go back” or “correction”.
To cancel a voice recognition session, simply wait 5 seconds or say “cancel” or “Quit”.
To interrupt the system voice and give a command quickly, press the

or button on the

steering wheel.
When speaking Phonebook names, please be aware some phones require the last name to be
spoken before the first name. For example, “Michael Smith” may be spoken as “Smith Michael”.
To increase or decrease the volume of the voice prompts, push the volume control switches
on the steering wheel down or up or turn the VOL/ON•OFF control knob on the audio

system while the system is responding.
Voice commands (if so equipped) can be used to operate various Bluetooth System features.
See your Owner’s Manual for detailed information.
if the Voice Recognition system does not recognize your voice commands, train the system
using the Speaker Adaptation Mode.
Some commands are not available while the vehicle is in motion.
The “Help” command can be used to hear a list of available commands at any time.
Please refer to the cellular phone manufacturer’s Owner’s Manual for detailed information
regarding your Bluetooth phone.
for recommended phones and detailed instructions, please visit
www.nissanusa.com/bluetooth.

Bluetooth system without navigation* (if so equipped)

PAiRinG PROceduRe
nOTe: The vehicle must be stationery when pairing the
phone.
1. Press the

button on the steering wheel. The

system announces the available commands.
2. Say: “Setup”. The system acknowledges the
command and announces the next set of available
commands.
3. Say: “Pair phone”. The system acknowledges the
command and announces the next set of available commands.
4. Say: “new phone”. The system acknowledges the command and asks you to initiate pairing
from the phone handset.
5. initiate connecting from the phone.
• The pairing procedure varies according to each cellular phone model. For detailed pairing
instructions and a list of compatible phones, please visit www.nissanusa.com/bluetooth.
• When prompted for a PASSKEY code, enter “1234” from the handset. (The PASSKEY
code is assigned by niSSAn and cannot be changed.)

*Some jurisdictions prohibit the use of cellular telephones while driving.

Advertising