First drive features, 3rd row power folding seats (if so equipped), Automatic drive positioner (if so equipped) – NISSAN 2014 Armada - Quick Reference Guide User Manual

Page 8

Advertising
background image

To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi

6

FIRST DRIVE FEATURES

3RD ROW POWER FOLDING SEATS (if so equipped)

Before operating the 3rd row seats:

• Make sure the 2nd row seatback is not reclined.
• Lower the 3rd row headrest to the full down position.
• Disconnect and secure the center seat belt and tongues into the retractor base. Always

reconnect the center seat belt when the seat is returned to the upright position.

• Make sure that there are no objects on the seatback cushion.
The 3rd row power folding seat controls are located

behind the 2nd row seat (passenger’s side) on the
3rd row cup holder console

01

and on the rear

quarter trim panel behind the 3rd row seats
(passenger’s side)

02

.

To fold down the 3rd row seats, push and hold the

bottom portion of the switch.

To raise the 3rd row seats, push and hold the top

portion of the switch.

If the ignition switch is in the OFF position, the

power folding seats are always operational.

If the ignition switch is in the ON position, the power

folding seats are only operational when the shift
lever is in the P (PARK) or N (NEUTRAL) position.

For more information, refer to the “Safety –– Seats, seat belts and
supplemental restraint system (section 1)”
of your Owner’s Manual.

AUTOMATIC DRIVE POSITIONER (if so equipped)

Two positions for the driver’s seat, accelerator and
brake pedals and outside mirrors can be stored in
the automatic drive positioner memory.

Follow these procedures to set the memory positions:
• Confirm the shift lever is in the P (PARK) position.
• Place the ignition switch in the ON position.
• Adjust the driver’s seat, accelerator and brake pedals and outside mirrors to the desired

positions using the adjusting switches for each feature.

• Push the SET switch and within 5 seconds, push the memory switch (1 or 2) for at least

1 second.

• The indicator light on the memory switch you select will illuminate for approximately 5 seconds.
• The driver’s seat, accelerator and brake pedals and outside mirror positions are now set to

your preference.

These memorized positions can also be linked to your NISSAN Intelligent Key

®

.

For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.

01

02

1590747_14b_Armada_QRG_011614.indd 6

1/16/14 10:41 AM

Advertising