Intelligent key -25 – NISSAN 2012 Cube - Owner's Manual User Manual

Page 287

Advertising
background image

SDI2451

INTELLIGENT KEY

Replace the battery in the Intelligent Key as
follows:

1. Remove the mechanical key from the In-

telligent Key.

2. Insert a small screwdriver into the slit of the

corner and twist it to separate the upper part
from the lower part. Use a cloth to protect
the casing.

3. Replace the battery with a new one.

Recommended battery:

CR2025 or equivalent

.

Do not touch the internal circuit and

electric terminals as doing so could
cause a malfunction.

.

Hold the battery by the edges. Holding

the battery across the contact points will
seriously deplete the storage capacity.

.

Make sure that the

+ side faces the

bottom of the case.

SDI2452

4. Align the tips of the upper and lower parts

*

1

, and then push them together

*

2

until it

is securely closed.

5. Operate the buttons to check its operation.

See a NISSAN dealer if you need any assistance
for replacement.

FCC Notice:

For USA:

This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interfer-
ence received, including interference that

Maintenance and do-it-yourself

8-25

Advertising