NISSAN 2012 Cube - Quick Reference Guide - Manual (Page 9)

HeaDLIGHT CONTrOL SwITCH
HeAdLiGHT cOnTROL
Turn the headlight control switch to the
position
01
to turn on the front parking, side marker, tail, license
plate and instrument panel lights. Turn the switch to the
position
02
to turn on the headlights.
AuTOLiGHT SYSTeM (if so equipped)
The autolight system will automatically turn the headlights on when it is dark and off when it is
light. The system will keep the headlights on for a period of time after you turn the ignition off
and all doors are closed.
To activate the autolight system, turn the headlight control switch to the auTO position
03
then push the ignition switch to ON. To deactivate the autolight system, turn the headlight
control switch to the OFF, 01
or position
02
.
HiGH BeAM SeLecT
Push the headlight control switch forward 04
to
select the high beam function. The blue indicator
light
illuminates in the instrument panel. Pull the
headlight switch back to the original position to select
the low beam. The blue indicator light goes off.
Pull and release the headlight control switch 05
to
flash the headlight high beams on and off.
7
PuSH BuTTOn eMeRGencY enGine SHuT Off
To shut off the engine in an emergency situation while driving, perform one of the following procedures:
Rapidly push the push button ignition switch 3 consecutive times in less than 1.5 seconds, or
Push and hold the push button ignition switch for more than 2 seconds.
MaNuaL TraNSMISSION (if so equipped)
depress the brake pedal.
Move the shift lever to N (Neutral).
depress the clutch pedal to the floor.
Turn the ignition switch to start the engine.
TuRninG THe enGine Off
Apply the foot brake and place the vehicle in first gear, then apply the parking brake and turn
the ignition switch to OFF.
for more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi.
03
01
02
04
05