NISSAN 2014 Cube - Quick Reference Guide - Manual (Page 10)

8
To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi.
HEADLIGHT CONTROL SWITCH
HEADLIGHT cONTROL
Turn the headlight control switch to the
position
01
to turn on the front parking, side marker, tail, license
plate and instrument panel lights. Turn the switch to the
position
02
to turn on the headlights.
AUTOLIGHT SYSTEM (if so equipped)
The autolight system will automatically turn the headlights on when it is dark and off when it is
light. The system will keep the headlights on for a period of time after you turn the ignition off
and all doors are closed.
To activate the autolight system, turn the headlight control switch to the AUTO position 03
then push the ignition switch to ON. To deactivate the autolight system, turn the headlight
control switch to the OFF position,
position 01
or position 02 .
HIGH BEAM SELEcT
Push the headlight control switch forward
04
to
select the high beam function. The blue indicator
light
illuminates in the instrument panel. Pull the
headlight switch back to the original position to select
the low beam
. The blue indicator light
will extinguish.
Pull and release the headlight control switch 05
to
flash the headlight high beams on and off.
MANUAL TRANSMISSION (if so equipped)
Depress the brake pedal.
Move the shift lever to the N (Neutral) position.
Depress the clutch pedal to the floor.
Turn the ignition switch to start the engine.
TURNING THE ENGINE OFF
Apply the foot brake and place the shift lever in first
gear, then apply the parking brake and turn the ignition switch to OFF.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
03
01
02
04
05
first drive features
1523989_14_Cube_QRG_091613.indd 8 9/16/13 3:31 PM