NISSAN 2013 GT R - Service & Maintenance Guide - Manual (Page 9)

Checking the exhaust finisher and rear bumper clearance Note 5
● Note 5: Clearance between the enlarged-diameter exhaust finisher and the rear bumper is realized by using highly rigid
exhaust mount rubber to control rear muffler vibration. The clearance between the exhaust finisher and the rear bumper
may alter as the exhaust mount rubber changes shape due to vibration, passage of time and high exhaust temperature
during high performance driving. Therefore, inspection of the clearance is necessary during the GT-R special inspection
and when engaging in performance driving.
Increase tightening of the strut support bar attachment section with the shock absorber Note 6
● Note 6: During the first GT-R special inspection (after 1,000 miles), the strut support bar attachment bracket and
shock absorber (each one on the left and right sides) must be tightened to the specified tightening specification. The
strut support bar attachment bracket and shock absorber (each one on the left and right sides) must be tightened to
the specified tightening specification 300-600 miles (500-1000 km) after the support bar or shock absorber have
been removed or installed.
As a condition of warranty, the above six inspections are required at the following intervals: 1,000 miles, 12 months, 24
months and 36 months. These inspections will be performed free of charge at a GT-R certified Nissan dealer only. All
inspections and services on the above six items, performed outside the above intervals, are performed at the
customer’s expense. See your 2013 Nissan GT-R Warranty Information Booklet for details.
After the period of GT-R performance optimization services in the first three years, these items are included in the
regular scheduled maintenance.
*Repairs and adjustments involving part replacement, etc. determined to be necessary as a result of these inspections
are performed at the customer’s expense.
*See your 2013 NISSAN GT-R Warranty Information Booklet for significant limitations, exclusions, and possible voiding
of warranty resulting from failure to have these necessary inspections, repairs and/or adjustments performed.
NISSAN MAINTENANCE
8