NISSAN 2014 GT R - Quick Reference Guide - Manual (Page 16)

DrIVe cOMPuTer
The drive computer is located in the vehicle information
display 01
on the bottom of the tachometer.
Press the button 02
to cycle through the
following modes on the vehicle information display:
• MPG – Displays the current fuel consumption.
• MPh – Displays the current vehicle speed.
• cruISe/MPh – Displays the set cruise
control status.
• MPG/MPh – Displays the average fuel economy
and average speed since the last reset.
• TIMe/MILeS – Displays the elapsed time and
distance driven since the last reset.
• raNGe – Displays the estimated distance the vehicle can be driven before refueling.
• OuTSIDe TeMP – Displays the outside air temperature.
• SeTTING – Allows you to set reminders or preferences for alerts, maintenance intervals
or language displays in the system.
— Press the button 03
to cycle through the various SeTTING modes.
— Press the button 02
to choose the selected mode.
• warNING – If there are any.
To reset the trip odometer and elapsed time press and hold the button for more than 1 second.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
01
02
03
system guide
14
BLueTOOTh ® haNDS-Free PhONe SYSTeM
With an overhead microphone and sound transmitted
through the audio system speakers, the Bluetooth ®
Hands-free Phone System utilizes Bluetooth ®
wireless technology and voice recognition to provide
hands-free cellular phone communication.
A cellular telephone should not be used while driving
so full attention may be given to vehicle operation.*
SYSTEM OPERATING TIPS
The “Help” command can be used to hear a list of
available commands at any time.
Reduce background noise as much as possible by
closing windows and pointing HVAC vents away from the ceiling.
*Some jurisdictions prohibit the use of cellular telephones while driving.
To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi.
1276458_14a_GTR_QRG_Text-Insert_113012.indd 14 11/30/12 1:45 PM