First drive features, Cruise control – NISSAN 2015 GT R - Quick Reference Guide User Manual

Page 14

Advertising
background image

To view detailed instructional videos regarding these and other features,

please go to www.nissanownersinfo.mobi.

12

FIRST DRIVE FEATURES

CRUISE CONTROL

The cruise control system enables you to set a

constant cruising speed above 25 mph (40 km/h).

The system will automatically maintain the set

speed until you tap the brake pedal, accelerate,
cancel or turn the system off.

To activate the cruise control, push the ON/OFF

switch

1

. The CRUISE indicator light in the

instrument panel will illuminate.

To set a cruising speed, accelerate the vehicle to

the desired speed, push the COAST/SET switch

2

and release. The SET indicator light

in the instrument panel will illuminate. Take your foot off the accelerator pedal. Your vehicle
will maintain the set speed.

To reset at a faster cruising speed, push and hold the RES/ACCEL switch

3

. When

the vehicle attains the desired speed, release the switch.

To reset at a slower cruising speed, push and hold the COAST/SET switch

2

.

Release the switch when the vehicle slows to the desired speed.

To turn cruise control off without erasing the set speed, push the CANCEL switch

4

.

The SET indicator light in the instrument panel will extinguish.

To turn off cruise control, push the ON/OFF switch

1

. Both the CRUISE indicator

light and the SET indicator light in the instrument panel will extinguish.

For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.

1

2

3

4

4

STATION PRESET BUTTONS

Six stations can be set for the AM band, 12 for the FM band and 18 for satellite radio.

To store a station in a preset, you must first select a radio band by pressing the

AM•FM button

5

or SAT button

6

then tune to the desired AM, FM or satellite

radio station.

Then press and hold the desired station preset button (1-6) until the sound is briefly

muted. The station indicator will then display, and the sound will resume. Programing
is now complete.

To retrieve a previously set station, select the radio band where the preset was stored

then press the corresponding station select button (1-6).

For more information, refer to the “Audio system (section 3)” of your Multi Function Display Owner’s Manual.

1655184_15b_GTR_QRGText-Insert_062414.indd 12

6/24/14 9:06 AM

Advertising