NISSAN 2015 GT R - Service & Maintenance Guide - Manual (Page 9)

GT-R Performance Optimization Services
In addition to the regular maintenance recommended by NISSAN, the GT-R requires the following
Inspections; Measurement and adjustment of wheel alignment if needed (unladen with fuel and
lubricants full, including tire pressure adjustment) Note 1
● Note 1: This vehicle is equipped with a high performance suspension. As the suspension
components
Љbreak-inЉ, the vehicle’s wheel alignment needs to be measured and adjusted by a
GT-R certified dealer at the recommended intervals. Preventing Toe-Out: Toe-out can cause uneven
tire wear or damage to areas inside the tires due to high heat. Be sure to have the wheel alignment
toe-in setting checked and adjusted by your GT-R certified NISSAN dealer before any performance
driving on closed circuit tracks. Obey all traffic laws when on public roads.
Toe-in specification for each wheel
Front:
≤ 0.059 in (1.5 mm)
Rear:
≤ 0.079 in (2.0 mm)
Transmission settings Note 2
● Note 2: The design of the clutch and transmission requires inspection and adjustment of the clutch
and shift forks by a GT-R certified NISSAN dealer at the recommended intervals. If the transmission
setting is not complete, excessive loads may be applied to the transmission and power train system
parts during starting and shifting, which may result in a malfunction or damage.
NISSAN MAINTENANCE
7