NISSAN 2015 GT R - Multi Function Display Owner's Manual - Manual (Page 230)

HOW TO READ DISPLAYED LINES
(Only Rear View Monitor)
Guiding lines which indicate the vehicle width
and distances to objects with reference to the
bumper line
*
A are displayed on the monitor.
Distance guide lines:
Indicate distances from the bumper.
. Red line
*
1 : approx. 1.5 ft (0.5 m)
. Yellow line
*
2 : approx. 3 ft (1 m)
. Green line
*
3 : approx. 7 ft (2 m)
. Green line
*
4 : approx. 10 ft (3 m)
Vehicle width guide lines
*
5 :
Indicate the vehicle width when backing up.
predictive course lines
*
6 :
Indicate the predictive course when backing up.
The predictive course lines will be displayed on
the monitor when the shift lever is in the "R"
(Reverse) position and the steering wheel is
turned. The predictive course lines will move
depending on how much the steering wheel is
turned and will not be displayed while the
steering wheel is in the neutral position.
How to adjust RearView screen
To adjust the Brightness, Tint, Color, Contrast
and Black Level of the RearView Monitor, press
<SETTING> with the RearView Monitor on,
select the “Display” key on the screen and select
the item key and adjust the level using the center
dial.
Do not adjust the Brightness, Tint, Color,
Contrast and Black Level of the RearView
Monitor while the vehicle is moving.
ABOUT REARVIEW MONITOR
Difference between predicted and
actual distances
The distance guide line and the vehicle width
guide line should be used as a reference only
when the vehicle is on a level, paved surface.
The distance viewed on the monitor is for
reference only and may be different from the
actual distance between the vehicle and dis-
played objects.
Monitor system 9-3