NISSAN 2011 LEAF - Roadside Assistance Guide - Manual (Page 21)

4-3 P (Park) Position Release Procedure
If you need to release the vehicle from the P (Park) position, proceed as follows. When power switch is
turned OFF or 12V battery is low, LEAF automatically shifts to P position.
NOTE:
This procedure requires two (2) people.
1. To start the EV system with a booster battery, refer to 4-1 Jump Starting .
2. Turn power switch ON by pushing the power switch 2 times without pressing brake pedal.
3. Confirm parking brake is ON (indicator in electric parking brake switch will be ON).
4. Place the selector lever in the N (Neutral) position.
5. Close all doors and press the brake pedal.
6. Remove the following 3 fuses:
• PBW MTR-1 20A (under hood fuse box behind 12V battery)
• PBW MTR-2 20A (under hood fuse box behind 12V battery)
• METER 1 10A (in the cabin fuse box)
Under Hood Fuse Box Location
21