Usb memory operation -19, Caution – NISSAN 2013 LEAF - Navigation System Owner's Manual User Manual

Page 153

Advertising
background image

USB MEMORY OPERATION

Connecting USB memory

Connect a USB memory as shown in the
illustration. The USB screen is displayed.

CAUTION

. Do not force the USB device into the

USB port. Inserting the USB device
tilted or up-side-down into the port
may damage the USB device and
the port. Make sure that the USB
device is connected correctly into
the USB port. (Some USB devices
come with a

mark as a guide.

Make sure that the mark is facing
the correct direction before insert-
ing the device.)

. Do not locate objects near the USB

device to prevent the objects from
leaning on the USB device and the
port. Pressure from the objects may
damage the USB device and the
port.

Playing USB memory

Push the power switch to the "ACC" or "ON"
position. Then, push the CD·AUX button
repeatedly to switch to the USB memory mode.
If the system has been turned off while the USB
memory was playing, pushing the

button will

start the USB memory.

How to view USB memory screen

*

1

Indicates Track title, Album title and Artist Name.
If there is no track title, the file name will be
displayed.

*

2

Indicates the play mode that is currently set.
However, the play mode is not indicated when
the normal mode is set.

*

3

[Mode]:
The play mode setting display will appear when
[Mode] is touched.

*

4

[Info]:
Touch the screen to indicate the track information
screen.

*

5

[SCAN]:
Touch to play the next track after playing the
current track for 10 seconds. Touch again to
choose the last track that was played last time.

*

6

Folder list:
Touch the folder to indicate the track list.
Track list:
Touch the screen to play the track that is chosen.

Selecting tracks

Push

of the TUNE SEEK CH button to play

the previous track.

Push

of the TUNE SEEK CH button to play

the next track.

Touch the track on the track list to play the track
that is chosen.

Touch the folder to indicate the track list.

SCAN function:

Touch [SCAN] to play the next track after playing
the current track for 10 seconds. Touch [SCAN]

Audio system

4-19

Advertising