NISSAN 2013 LEAF - Quick Reference Guide - Manual (Page 21)

TrIP COMPuTer
The Trip Computer 01
is located in the dot matrix
liquid crystal display .
With the power switch in the ON position, trip
computer modes can be selected by pressing the
button
02
on the left side of the instrument panel .
The following modes can be selected in the display:
• To 100% Charge – Displays the estimated time
to a full Li-ion charge by using either 120 volt or
240 volt .
• energy economy – Displays the average and
instant energy economy .
• average Speed – Displays the average vehicle
speed since the last reset .
• Driving Distance and elapsed Time – Displays
the total distance the vehicle has been driven and
the time since the last reset .
• SOC% – Displays the vehicle’s current state of charge .
• Settings – Allows you to adjust the system settings for features such as the clock, reminders
or preferences for alerts, maintenance intervals and language displays .
· Press the button
03
to cycle through the various setting modes .
· Press the button 02
to choose the selected mode .
• warning – If there are any .
To reset Driving Distance and Elapsed Time, go to that mode on the trip computer and hold the
button 03 for longer than 1 second .
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual .
03 02
01
system guide
To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi. 19
1275820_13_Leaf_QRG_Text-Insert_121912.indd 19 12/19/12 10:11 AM