NISSAN 2014 LEAF - Quick Reference Guide - Manual (Page 22)

To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi. 20
BLUETOOTH ® HANDS-FREE PHONE SYSTEM
A cellular telephone should not be used while driving
so full attention may be given to vehicle operation.*
SYSTEM OPERATING TIPS
Press the
or button to interrupt the voice
prompts at any time and speak a command after
the tone.
To use the system faster, you may speak the second
level commands with the main menu command on
the main menu. For example, press the
or
button and after the tone say, “Call Redial”.
The “Help” command can be used to hear a list of
available commands at any time.
Reduce background noise as much as possible by
closing windows and pointing HVAC vents away
from the ceiling.
Speak naturally without long pauses and without raising your voice.
When speaking Phonebook names, please be aware some phones require the last name
to be spoken before the first name. For example, “Michael Smith” may be spoken as
“Smith Michael”.
To cancel a voice recognition session, simply wait 5 seconds, say “Cancel” or “Quit”,
or press and hold the button for 5 seconds.
To increase or decrease the volume of the voice prompts, push the volume control
switches + or - on the steering wheel or turn the control dial on the audio system while the
audio system is responding.
If the Voice Recognition system does not recognize your voice commands, train the system
using the Voice Adaptation Mode. See your Owner’s Manual for detailed information.
For more detailed information and instructions, see your cellular phone Owner’s Manual
and visit www.nissanusa.com/bluetooth.
*Some jurisdictions prohibit the use of cellular telephones while driving.
BLUETOOTH ® SYSTEM WITHOUT
NAVIGATION (if so equipped)
CONNECTING PROCEDURE
The vehicle must be stationary when connecting
the phone.
1. Press the button on the steering wheel. The
system announces the available commands.
2. Say: “Connect phone”. The system
acknowledges the command and announces the next set of available commands.
3. Say: “Add phone”. The system acknowledges the command and asks you to initiate
connecting from the phone handset.
SYSTEM GUIDE
Bluetooth ®
Controls
Microphone
1700496_14b_Leaf_QRG_021114.indd 20 2/11/14 3:48 PM