NISSAN 2015 LEAF - Navigation System Owner's Manual - Manual (Page 96)

(92,1)
[ Edit: 2014/ 1/ 30 Model: Navi-EV ]
3-40 Navigation
INFO:
. The 4 routes may not always be different.
. When using waypoints, [More Routes] is
disabled. After route guidance is started,
change the route between each way-
point.
“Editing route” (page 3-48)
3. Touch [OK].
INFO:
The remaining battery power estimation function
cannot be used to confirm condition changes
that arise after driving starts. Utilize the function
as a reference when selecting driving routes.
.
After starting to drive, refer to the driving
range on the meter and perform battery
charging allowing for some leeway.
. The remaining battery power estimation
function cannot be used confirm condition
changes that arise after driving starts. Utilize
the function as a reference when selecting
driving routes.
. In the following instances, the actual battery
power may differ from the remaining battery
power estimation.
— Frequent repetition of sudden accelera-
tion and sudden braking
— Change of air conditioner operating
conditions
— Change of traffic conditions and driving
routes that differ from the one used for
the estimation
— Strong wind, cold, and snow weather
conditions
— Tires that do not comply with specifica-
tions, low air pressure tires, worn tires,
studless tires, and others.
— Decreased capacity of the Li-ion battery
— Installation of equipment that does not
comply with specifications (carriers and
others)
Confirming route
1. Touch [Route Info].
2. Touch the preferred information item.
Available information
. [Turn List]:
Displays the details of the suggested route.
“Using turn list” (page 3-52)
. [Store Route]:
Stores a calculated route. A maximum of 5
routes can be stored. Stored routes can be
easily retrieved and set as the suggested
route. If no waypoints are set on the route,
the route cannot be stored.
“Storing route” (page 3-60)
. [Map Scroll]:
Displays a map screen where the location of
the destination can be confirmed.
Condition: NAM/