NISSAN 2015 LEAF - Dismantling Guide - Manual (Page 42)

6. Remove the bonding plates (1).
Touching high voltage components without wearing
appropriate Personal Protective Equipment (PPE) will
cause electrocution.
7. Remove ONLY the Li-ion battery mounting bolts (A) (6
bolts).
At this stage of disassembly, NEVER remove the 4 bolts
(B) shown in the illustration. These remaining 4 bolts
will retain the Li-ion battery to the vehicle body
while the lifter table can be set up in the next step.
Touching high voltage components without wearing
appropriate Personal Protective Equipment (PPE) will
cause electrocution.
8. Set the pallet (1) onto the lift table (2).
• Align the pallet center mark (A) and the lifter center
mark (B) (white line).
Touching high voltage components without wearing
appropriate Personal Protective Equipment (PPE) will
cause electrocution.
1
AAYIA0168ZZ
A
A
A
B
B
B
B
A
A
AAYIA0169ZZ
1
1
2
2
B
B
A
A
AAYIA0097ZZ
DG–42