NISSAN 2010 Maxima - Quick Reference Guide - Manual (Page 28)

26
Press the button on the steering wheel to activate voice recognition.
Wait for the “Would you like to access Phone, navigation, information, audio or Help?”
prompt and the listening tone before speaking.
Begin speaking a command within 1.5 seconds of the listening tone.
To cancel a voice recognition session, press and hold the button for 2 seconds.
To increase or decrease the volume of the voice prompts, push the + or – (volume)
control buttons on the steering wheel or turn the VOL (volume) knob on the audio system
while the system is responding.
Speak in a clear and natural voice without pausing between words.
Some commands are not available while the vehicle is in motion.
The “Help” command will bring up the voice recognition command list.
Please refer to the cellular phone manufacturer Owner’s Manual for detailed information
regarding your Bluetooth ® phone.
For recommended phones and detailed instructions, please visit
www.nissanusa.com/bluetooth.
cOnnecTinG YOuR PHOne
Before using the hands-free feature, you
need to set up, or connect, the system to
recognize your compatible cellular phone(s).
five Bluetooth
® -enabled phones can be con-
nected. after setup, the system automatically
connects with a connected phone when the
ignition is in the acc or On position, as long
as the phone is on and in the vehicle.
cOnnecTinG PROceduRe
nOTe: The vehicle must be stationary when connecting the phone.
1. Press the PHONE button on the control panel.
2. Touch the “connect Phone” key and a pop up box will appear.
3. Read the information and touch “Yes.”
4. initiate connecting from the phone.
The connecting procedure for cellular phones varies according to each cellular phone
model. for detailed connecting instructions and a list of compatible phones, please visit
www.nissanusa.com/bluetooth.
The Pin code will appear on the screen (1234 is the default).
6. When the connecting is complete, the screen will return to the Phone screen.