NISSAN 2014 Maxima - Owner's Manual User Manual

Page 316

Advertising
background image

● CVT operation is limited to automatic drive

mode when CVT fluid temperature is ex-
tremely low even if manual shift mode is
selected. This is not a malfunction. When
CVT fluid warms up, manual mode can be
selected.

● When the CVT fluid temperature is high, the

shift range may upshift in lower rpm than
usual. This is not a malfunction.

Shift lock release

If the battery charge is low or discharged, the
shift lever may not be moved from the P (Park)
position even with the brake pedal depressed
and the shift lever button pressed.

It will be necessary to jump start or have your
battery charged, see “Jump starting” in the “In
case of emergency” section. Contact your
NISSAN dealer or a professional towing service.

To move the shift lever, complete the following
procedure:

1. Press the ignition switch to the LOCK posi-

tion.

2. Apply the parking brake.

3. Using a protective cloth on the tip of a 3 mm

screwdriver, remove the shift lock release
cover.

● If available, a plastic trim tool can also be

used.

4. Insert the small screwdriver in the shift lock

release slot and push down.

5. Move the shift lever to the N (Neutral) posi-

tion while holding down the shift lock re-
lease.

6. Push the ignition switch to the ON position

to unlock the steering wheel. Now the ve-
hicle may be moved to the desired location.

If the shift lever cannot be moved out of P (Park),
have a NISSAN dealer check the transmission as
soon as possible.

WARNING

If the shift lever cannot be moved from the
P (Park) position while the engine is run-
ning and the brake pedal is depressed, the
stop lights may not work. Malfunctioning
stop lights could cause an accident injur-
ing yourself and others.

WSD0236

Starting and driving

5-17

Advertising