NISSAN 2013 Murano - Quick Reference Guide - Manual (Page 14)

HEADLIGHT CONTROL SWITCH
HEADLIGHT CONTROL
Turn the headlight control switch to the
position 01
to turn on the front parking, side
marker, tail, license plate and instrument panel
lights. Turn the switch to the
position
02
to
turn on the headlights.
AUTOLIGHT SYSTEM (if so equipped)
The autolight system will automatically turn the headlights on when it is dark and off when it
is light. The system will keep the headlights on for a period of time after you turn the ignition
off and all doors are closed.
To activate the autolight system, turn the headlight control switch to the AUTO position 03
then push the ignition switch to ON. To deactivate the autolight system, turn the headlight
control switch to the OFF, 01
or position
02
.
HIGH BEAM SELECT
Push the headlight control switch forward 04
to
select the high beam function. The blue indicator
light illuminates in the instrument panel. Pull
the headlight switch back to the original position to
select the low beam. The blue indicator light goes off.
Pull and release the headlight control switch 05
to
fl ash the headlight high beams on and off.
12
f i r s t d r i v e f e a t u r e s
01
03
02
STARTING/STOPPING THE ENGINE
Depress the brake pedal.
Press the ignition switch START/STOP button to
start the engine.
NOTE: It is important to make sure the NISSAN Intelligent
Key
® is with you (that is, in your pocket or purse).
TURNING THE ENGINE OFF
Move the shift lever to the P (PARK) position and
apply the parking brake.
Press the ignition switch START/STOP button to
turn the engine off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
04
05
W
s
To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi.