Outside mirrors -49, Warning – NISSAN 2014 Murano - Owner's Manual User Manual

Page 206

Advertising
background image

SPA2422A

Type A

SPA2450

Type B

Automatic anti-glare type

The inside mirror is designed so that it
automatically changes reflection according to
the intensity of the headlights of the following
vehicle.

The anti-glare system will be automatically
turned on when the ignition switch is pushed
to the ON position.

When the anti-glare system is turned on, the
indicator light

*

A

will illuminate and excessive

glare from the headlights of the vehicle behind
you will be reduced.

Type A: Push the

switch

*

B

to make the

inside rearview mirror operate normally and the
indicator light will turn off. Push the

switch

again to turn the system on.

Type B: Push the “

*” switch

*

C

to make the

inside rearview mirror operate normally. The
indicator light will turn off. Push the “I” switch

*

D

to turn the system on.

Do not allow any object to cover the
sensors

*

E

or apply glass cleaner on

them. Doing so will reduce the sensitivity
of the sensor, resulting in improper opera-
tion.

For the compass (if so equipped) operation, see
“Compass” in the “2. Instruments and controls”
section.

For the HomeLink

®

Universal Transceiver opera-

tion, see “HomeLink

®

Universal Transceiver” in

the “2. Instruments and controls” section.

OUTSIDE MIRRORS

WARNING

Objects viewed in the outside mirror on
the passenger side are closer than they
appear. Be careful when moving to the
right. Using only this mirror could cause
an accident. Use the inside mirror or
glance over your shoulder to properly
judge distances to other objects.

Pre-driving checks and adjustments

3-49

Advertising