NISSAN 2013 Pathfinder - Quick Reference Guide - Manual (Page 12)

first drive features
STARTiNG/SToPPiNG THE ENGiNE
Depress the brake pedal.
Press the ignition switch START/SToP button to start
the engine.
NOTE: It is important to make sure the NISSAN Intelligent
key
® is with you (that is, in your pocket or purse).
TURNING THE ENGINE OFF
Move the shift lever to the P (PARK) position and apply the parking brake.
Press the ignition switch START/SToP button to turn the engine off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
oUTSiDE MiRRoR CoNTRol SWiTCH
(if so equipped)
To select the right or left side mirror, move the control
switch 01 right or left.
Adjust each mirror to the desired position using the
switch 02 .
REVERSE TILT-DOWN FEATURE (if so equipped)
The reverse tilt-down feature will turn the selected outside mirror surface downward to
provide better rear visibility close to the vehicle.
1. Set the parking brake.
2. Push the ignition switch to the oN position.
3. Move the shift lever to the R (REvERSE) position.
4. choose the right or left outside mirror by operating the outside mirror control switch
01 .
5. The outside mirror surfaces move downward.
The outside mirror surfaces will return to their original positions when one of the following
conditions has occurred:
• The shift lever is moved to any position other than R (REvERSE).
• The outside mirror control switch is set to the center “neutral” position.
• The ignition switch is placed in the oFF position.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
01 02
10
To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi.
1351506_13c_Pathfinder_QRG_013013.indd 10 1/31/13 9:10 AM