NISSAN 2012 Rogue - Quick Reference Guide - Manual (Page 4)

arouND view™ MoNiTor (if so equipped)
With the ignition switch in the oN position, the Around
View Monitor is activated by pressing the CaMera
button
01
, located on the center console, or by
moving the shift lever to the r (reverSe) position.
The monitor displays various views of the position of
the vehicle.
When the shift lever is in the P (ParK), N (NeuTral)
or D (Drive) position and the CaMera button
01
is
pressed, the following views will display in order:
new system features
2
To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi.
01
When the shift lever is in the r (reverSe) position and the CaMera button 01
is
pressed, the following views will display in order:
Start from any control Panel screen
Rear view & bird’s-eye view
front view & front-side view
Press
Press
Press
Press Press
front view & bird’s-eye view
Rear view & front-side view
The colored guide lines on the display screen indicate vehicle width and approximate distances
to objects with reference to the vehicle body line.
• Red 1.5 ft (0.5 m); Yellow 3 ft (1 m); Green 7 ft (2 m) and 10 ft (3 m).