NISSAN 2013 Sentra - Quick Reference Guide - Manual (Page 8)

STarTiNG/SToPPiNG THe eNGiNe
cONTINUOUSLY VARIABLE TRANSMISSION
(NISSAN Intelligent key
® models only - if so equipped)
Depress the brake pedal.
• If the brake pedal is not depressed, pushing the
ignition switch once enters the aCC mode.
• If the ignition switch is pushed a second time the
vehicle will enter the oN mode.
Move the shift lever to the P (ParK) position.
Push the ignition switch to start the engine.
NOTE: It is important to make sure the Intelligent key is with you (that is, in your pocket or purse).
MANUAL TRANSMISSION (if so equipped)
Depress the brake pedal.
Move the shift lever to the N (NeuTral) position.
Depress the clutch pedal to the floor.
Press the ignition switch.
ouTSiDe Mirror CoNTrol SWiTCH
Move switch 01 right or left to select the right
or left side mirror.
Adjust each mirror to the desired position using the
switch
02 .
Move the switch 01 to the middle “neutral”
position to prevent accidentally moving the mirror.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
SeaT aDJuSTMeNTS
To slide the front seat forward or backward, pull
up on the center of the bar
01
under the front of the
seat and slide forward or backward. Release the
bar to lock the seat in position.
To recline the seatback, pull up on the lever 02
and
lean back. To bring the seatback forward, pull the
lever up and lean your body forward. Release the
lever to lock the seatback in position.
SEAT LIFTER
To adjust the seat height, pull up or push down on the adjusting lever
03
repeatedly.
For more information, refer to the “Safety –– Seats, seat belts and supplemental restraint system (section 1)” of your
Owner’s Manual.
01
02
03
To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi.
02
01
first drive features
6